Main menu

Pages

My Top 5 Electrical Tips for Your Home

 

My Top 5 Electrical Tips for Your Home




The electrical system of your home is one of the most important systems to keep in tiptop shape. It keeps everything running smoothly by providing power when you flip a switch or turn on a light. Many homeowners don’t realize how much they need their electrical system until there is an issue. This article will teach you some helpful electrical tips that can make your life easier and save you money, too!


Be mindful of your power usage

The average family spends about $1,000 a year on electricity according to the US Energy Information Administration. The average home uses about 10,837 kWh of electricity each year. When you have a large family and live in an area with high electricity rates, this can get expensive!

If you’re looking to save money on your electric bill, try using these helpful tips!

- Switch off lights when they’re not needed
- Unplug electronics if they’re not being used
- A lot of electronics are always plugged into an outlet even when they aren't in use.

If you want to avoid wasting power while keeping your devices close by, invest in a power strip and plug them into this instead of directly into the wall. This way you can just turn off the strip or unplug it if it's not in use.

- Turn off appliances at night

- Turn off your air conditioning at night

- Close curtains during the day to keep heat out and cool your house down


Get an annual electrical inspection

A lot of homeowners don’t realize how important it is to have their home’s electrical system inspected regularly. However, it is one of the most important things you can do to ensure your home stays safe and runs smoothly. A qualified electrician will inspect every part of your home’s wiring, looking for any potential problems. They also check to make sure that everything is up-to-code and meets safety standards. If there are any issues, they can fix them right away before they become more serious. This can help you avoid major problems in the future, like a fire or even an electrical shock.


Know your circuit breaker size

The first tip is to know your circuit breaker size. All homes should have a properly sized circuit breaker, but many homeowners don’t know how to determine this. The size of the breaker can change depending on the number of amps and the square footage in your home. To get an accurate reading, use an electrical meter.


Consider installing a whole-home surge protector

If you have an older home with a circuit breaker, it’s likely that your electrical system is not grounded. And if you have a newer home with ground wire protection, it’s possible that your electrical system still isn't totally protected. You can install a whole-home surge protector to help protect all of the wirings in your home. This will help ensure that any surges or fluctuations in the power are stopped before they can get into the wiring and disrupt anything.


What is a whole home surge protector?

A whole-home surge protector is what you need if you are in a high-risk area or have appliances with sensitive electronics. It offers electrical protection by preventing power surges and lightning strikes from entering your home.


Why do I need one?

If your electrical system is on the fritz, your home will be without power and lights. This can cause some major problems. For example, if you get a surprise storm while you're at work and your power goes out, it's going to ruin all the food in your refrigerator since it won't stay cold without electricity.


Is it expensive?

Unless you’re living in a home that is 100 or more years old, chances are the wiring, breaker panel and main service panel are fairly new. This means you’re not likely to have to worry about wires corroding or switches failing due to wear and tear.

Fortunately, when it comes to electrical maintenance, it’s not as expensive as you might think. The average cost of having an electrician come out is $90-$150 per hour. That said, there are some things you can do on your own for a fraction of the cost. If you notice an issue with one of your light fixtures, for example, simply remove it from the wall and flip the switch up and down a few times. If the fixture starts working again without any other adjustments, this could mean that there is either a loose wire connection or just dirt clogging up the switch itself (which can be easily cleaned).

If this doesn’t work, make sure all the breakers in your breaker panel are turned off before removing any cables. You also want to double-check to make sure nothing else has been affected by flipping that particular breaker off- it could indicate that your circuit needs to be completely rewired!

These quick fixes will save you money on having an electrician come out and they won't take very long at all-so why not give them a try?


Insulate or replace your old wires

If you want to prevent fires in your home, you need to make sure that your electrical wires are up-to-date. Check to see if the insulation on your wires is dry and brittle. If so, it’s time for new insulation or wire replacement. You should also check for loose wires by opening the box of any appliance that plugs in or using a voltage tester. Loose wires can cause shorts, which can lead to fires.


Conclusion

Electrical safety is important, which is why it's important to understand the basics of electricity. By following these simple tips, you can protect your home and family from electrical hazards.

1. Be mindful of your power usage

The first step in electrical safety is prioritizing your power usage. By monitoring your usage, you can be proactive about preventing electrical hazards that may arise from overloading circuits or exceeding the power limits of your wiring.

2. Get an annual electrical inspection

An inspection can reveal issues with your home wiring and help determine if you need to take any precautions to avoid electrical hazards.

3. Know your circuit breaker size

The second step in ensuring your home's electrical safety is knowing the circuit breaker size of your home. If a circuit breaker trips, you need to know what size breaker you have and what size breaker you need to replace so you don't do any damage to your wiring or breakers.

4. Consider installing a whole-home surge protector

A whole-home surge protector can keep your home safe from power surges. If a surge does occur, the protection will be reduced to either the main panel or the surge protector, not both.

5. What is a whole home surge protector?


Comments